Skip to main content

Install the air baffle

Use this information to install the air baffle.

240VA shock hazard

Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.

moving parts
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
For server models installed with large size heat sink, the air baffle is not supported. See Important information for system board, processor, and heat sink.

To install the air baffle, complete the following steps:

Watch the procedure

A video of this procedure is available at YouTube.

Figure 1. Air baffle installation
Air baffle installation

  1. Align the tabs on both sides of the air baffle with the corresponding slots on both sides of the chassis.
  2. Lower the air baffle into the chassis and press the air baffle down until it is securely seated.

After installing the air baffle, if there is a RAID super capacitor module installed on the bottom of the air baffle, connect it to the RAID adapter with the extension cable that comes with the RAID super capacitor module.