Install the RAID super capacitor module on the chassis

Use this information to install a RAID super capacitor module.

Read the installation Guidelines

Power off the server for this task

ATTENTION: Static Sensitive Device Ground package before opening

Note

Your server supports up to two RAID super capacitor modules.

• For server models with 3.5-inch drive bays, install the first RAID super capacitor module in location 1 and install the second RAID super capacitor module in location 2.

• For server models with 2.5-inch drive bays:

  • If you have a RAID super capacitor module holder in location 3, install the first RAID super capacitor module in location 3 and install the second RAID super capacitor module in location 1.

  • If you do not have a RAID super capacitor module holder in location 3, you can install the first RAID super capacitor module in location 1 and install the second RAID super capacitor module in location 2.

Figure 1. RAID super capacitor module location

Before installing the RAID super capacitor module on the chassis, touch the static-protective package that contains the new RAID super capacitor module to any unpainted surface on the outside of the server. Then, take the new RAID super capacitor module out of the package and place it on a static-protective surface.

To install the RAID super capacitor module on the chassis, complete the following steps:

1. Remove the tray that covers the place of the RAID super capacitor module on the chassis.
   Figure 2. Tray removal
   

   

   
   
2. Install the RAID super capacitor module holder on the chassis.
   Figure 3. RAID super capacitor module holder installation
   

   

   
   
3. Open the retention clip on the holder, put the RAID super capacitor module into the holder and press it down to secure it into the holder.
   Figure 4. Installation of the RAID super capacitor module on the chassis