Skip to main content

Install the RAID super capacitor module on the chassis

Use this information to install the RAID super capacitor module on the chassis.

Read the installation GuidelinesPower off the server for this taskATTENTION: Static Sensitive Device Ground package before opening

Before installing the RAID super capacitor module on the chassis, touch the static-protective package that contains the new RAID super capacitor module to any unpainted surface on the outside of the server. Then, take the new RAID super capacitor module out of the package and place it on a static-protective surface.

To install the RAID super capacitor module on the chassis, complete the following steps:

  1. If the server comes with a tray that covers the place of the RAID super capacitor module on the chassis, remove it first.
    Figure 1. Tray removal
    Tray removal

  2. If the server does not have a RAID super capacitor module holder on the chassis, install one first.
    Figure 2. RAID super capacitor module holder installation
    RAID super capacitor module holder installation

  3. Open the retention clip on the holder, put the RAID super capacitor module into the holder and press it down to secure it into the holder.
    Figure 3. Installation of the RAID super capacitor module on the chassis
    Installation of the RAID super capacitor module on the chassis

After you finish

  1. Connect the super capacitor module to an adapter with the extension cable that comes with the super capacitor module. See Super capacitor cable routing.

  2. Complete the parts replacement. See Complete the parts replacement.

Demo video

Watch the procedure on YouTube