4 x 3.5'' U.3 drives with 4 x 3.5 AnyBay backplane (one processor)
Use this section to understand the cable routing for eight U.3 drives with 4 x 3.5'' AnyBay backplane and one processor installed.
To connect cables for a 7mm drive backplane, refer to 7mm drive backplane.
To connect cables for M.2 drives, refer to M.2 drive backplane.
Cable routing with an SFF HBA/RAID adapter
The following illustrations and tables show the mapping relationship between backplane connectors and an 8i or 16i SFF RAID adapter (Gen 4).
Figure 1. Cable routing for 4 x 3.5'' front U.3 drives with an 8i SFF RAID adapter (Gen 4)
|Front BP (SAS)||1 SAS||1 C0|