Remove the serial port module

Follow instructions in this section to remove the serial port module.

Procedure

1. Make preparation for this task.
   1. Remove the front top cover. See Remove the front top cover.
   2. Remove the rear top cover. See Remove the rear top cover.
   3. Disconnect the serial port cable from the system board assembly.
   4. Remove the PCIe riser where the serial port module has been installed. See Remove a PCIe riser.
2. Remove the serial port module.
   1. Unfasten the screw that secures the serial port module to the PCIe riser.
   2. Remove the serial port module from the PCIe riser.
      Figure 1. Serial port module removal