Skip to main content

Remove the MicroSD card

Follow the instructions in this section to remove the MicroSD card.

About this task

Attention

  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

  • Power off the server and peripheral devices and disconnect the power cords and all external cables. See Power off the server.

  • Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.

  • If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the top covers, or remove the server from the rack. See Remove the server from rails.

Procedure

  1. Make preparation for the task.
    1. Remove the front top cover. See Remove the front top cover.
    2. Remove the rear top cover. See Remove the rear top cover.
    3. Remove the crossbar. See Remove the crossbar.
    4. Remove all the PCIe risers. See Remove the PCIe riser.
  2. Remove the MicroSD card.
    Figure 1. Removing MicroSD card

    Removing MicroSD card
    1. Slide the socket lid to the open position.
    2. Lift open the socket lid.
    3. Remove the MicroSD card from the socket.

After you finish

  1. Install a replacement unit. See Install the MicroSD card.

  2. If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Demo video

Watch the procedure on YouTube