Install the front bezel

Follow this procedure to install the front bezel.

S002

CAUTION

The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.

About this task

Attention

Read Safety inspection checklist and Installation guidelines to ensure that you work safely.

Watch the procedure

A video of this procedure is available at YouTube.

Procedure

Install the front bezel.

Insert the three plastic tabs on the bottom of the front bezel with the corresponding slots on the front of the chassis.
Pivot the front bezel towards to chassis until it snaps into place.
Figure 1. Installing the front bezel

Give documentation feedback