Skip to main content

Installing the coin-cell battery

The following tips describe information that you must consider when installing the coin-cell battery.

  • Follow any special handling and installation instructions that come with the coin-cell battery.

  • Lenovo has designed this product with your safety in mind. The lithium battery must be handled correctly to avoid possible danger. If you install the coin-cell battery, you must adhere to the following instructions.
    Note
    In the U. S., call 1-800-IBM-4333 for information about battery disposal.
  • If you replace the original lithium battery with a heavy-metal battery or a battery with heavy-metal components, be aware of the following environmental consideration. Batteries and accumulators that contain heavy metals must not be disposed of with normal domestic waste. They will be taken back free of charge by the manufacturer, distributor, or representative, to be recycled or disposed of in a proper manner.
  • To order replacement batteries, call 1-800-IBM-SERV within the U.S., and 1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and Canada, call your support center or business partner.
    Note
    After you install the coin-cell battery, you must reconfigure the server and reset the system date and time.

    Graphic illustrating Safety Statement 2
    CAUTION

    When installing the lithium battery, use only Part Number 33F8354 or an equivalent type battery recommended by the manufacturer. If your system has a module containing a lithium battery, install it only with the same module type made by the same manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of.

    Do not:
    • Throw or immerse into water
    • Heat to more than 100°C (212°F)
    • Repair or disassemble

    Dispose of the battery as required by local ordinances or regulations.

To install the coin-cell battery, do the following:

  1. Install the new coin-cell battery. Ensure that the coin-cell battery retainer holds the battery securely.
    Figure 1. Coin-cell battery installation
    Coin-cell battery installation

  2. Complete the parts replacement. See Completing the parts replacement.
  3. Start Setup Utility and reset the configuration:
    1. Set the system date and time.
    2. Set the power-on password.
    3. Reconfigure the server.
    For more information, see Starting the Setup Utility program.