Skip to main content

Removing the operating temperature enhancement kit

To remove the operating temperature enhancement kit, do the following:

  1. Turn off the server. Then, disconnect all external cables and remove all peripheral devices.
  2. Remove the server cover. See Removing the server cover.
  3. Remove the PCI riser-card assembly. See Removing the PCI riser-card assembly.
  4. Disconnect the operating temperature enhancement kit connector from the system board.
    Figure 1. Operating temperature enhancement kit cable disconnection for 2.5-inch-drive model
    Operating temperature enhancement kit cable disconnection for 2.5-inch-drive model

    Figure 2. Operating temperature enhancement kit cable disconnection for 3.5-inch-drive model
    Operating temperature enhancement kit cable disconnection for 3.5-inch-drive model

  5. Detach the operating temperature enhancement kit 1 from the slot 2 on the hard disk drive cage.
    Figure 3. Operating temperature enhancement kit removal
    Operating temperature enhancement kit removal

  6. Complete the parts replacement. See Completing the parts replacement.