Skip to main content

806f0207-2584ffff : [ProcessorElementName] has Failed with FRB1/BIST condition. (All CPUs)

[ProcessorElementName] has Failed with FRB1/BIST condition. (All CPUs)

This message is for the use case when an implementation has detected a Processor Failed - FRB1/BIST condition.

May also be shown as 806f02072584ffff or 0x806f02072584ffff

Internal Event​

No

Severity​

Error

Alert Category​

Critical - CPU

Serviceable​

Yes

CIM Information​

Prefix:PLAT

and ID:0044

SNMP Trap ID​

40

Automatically Notify Support​

Yes

User Response​

  1. Update the latest level of system firmware and device drivers are installed for all adapters and standard devices, such as UEFI, IMM Ethernet,and SAS. Important: Some cluster solutions require specific code levels or coordinated code updates. If the device is part of a cluster solution, verify that the latest level of code is supported for the cluster solution before you update the code.
  2. Run the DSA program.
  3. (Trained technician only) Replace microprocessor n. (n = microprocessor number)
  4. (Trained technician only) Replace the system board.
One of the CPUs :