Removing and replacing Tier 1 CRUs
Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request, you will be charged for the installation.
The illustrations in this document might differ slightly from your hardware.
- Removing a hot-swap hard disk drive
Use this information to remove a hot-swap hard disk drive. - Replacing a hot-swap hard disk drive
Use this information to install a hot-swap hard disk drive. - Removing a simple-swap hard disk drive
Use this information to remove a simple-swap hard disk drive. - Replacing a simple-swap hard disk drive
Use this information to install a simple-swap hard disk drive. - Removing a 1.8-inch hot-swap solid state drive
Use this information to remove a 1.8-inch hot-swap solid state drive. - Replacing a 1.8-inch hot-swap solid state drive
Use this information to install a 1.8-inch hot-swap solid state drive. - Removing a DVD drive
Use this information to remove a DVD drive. - Replacing a DVD drive
Use this information to install a DVD drive. - Removing the DVD drive cable
Use this information to remove the DVD drive cable. - Replacing the DVD drive cable
Use this information to install the DVD drive cable. - Removing a tape drive
Use this information to remove a tape drive. - Replacing a tape drive
Use this information to install a tape drive. - Removing a memory module
Use this information to remove a memory module. - Installing a memory module
The following notes describe the types of DIMMs that the server supports and other information that you must consider when you install DIMMs. - Removing the fan bracket
Use this information to remove the fan bracket. - Replacing the fan bracket
Use this information to replace the fan bracket. - Removing a PCI riser-card assembly
Use this information to remove a PCI riser-card assembly. - Replacing a PCI riser-card assembly
Use this information to replace a PCI riser-card assembly. - Removing an adapter
Use this information to remove an adapter. - Replacing an adapter
Use this information to replace an adapter. - Removing an optional ServeRAID upgrade adapter memory module
Use this information to remove an optional ServeRAID upgrade adapter memory module. - Replacing an optional ServeRAID upgrade adapter memory module
Use this information to replace an optional ServeRAID upgrade adapter memory module. - Removing a remotely installed RAID adapter battery/flash power module
Use this information to remove a remotely installed RAID adapter battery/flash power module. - Replacing a RAID adapter battery/flash power module remotely in the server
Use this information to replace a RAID adapter battery remotely in the server. - Removing the dual-port network adapter
Use this information to remove the dual-port network adapter. - Replacing the dual-port network adapter
Use this information to replace the dual-port network adapter. - Removing a hot-swap ac power supply
Use this information to remove a hot-swap ac power supply. - Replacing a hot-swap ac power supply
Use this information to replace a hot-swap ac power supply. - Removing a hot-swap dc power supply
Use this information to remove a hot-swap dc power supply. - Replacing a hot-swap dc power supply
Use this information to replace a hot-swap dc power supply. - Removing a hot-swap fan
Use this information to remove a hot-swap fan. - Replacing a hot-swap fan
Use this information to replace a hot-swap fan. - Removing the 2.5-inch simple-swap/hot-swap hard disk drive backplate assembly/backplane
Use this information to remove the 2.5-inch simple-swap/hot-swap hard disk drive backplate assembly/backplane. - Replacing the 2.5-inch simple-swap/hot-swap hard disk drive backplate assembly/backplane
Use this information to replace the 2.5-inch simple-swap/hot-swap hard disk drive backplate assembly/backplane. - Removing the 3.5-inch simple-swap/hot-swap hard disk drive backplate assembly/backplane
Use this information to remove the 3.5-inch simple-swap/hot-swap hard disk drive backplate assembly/backplane. - Replacing the 3.5-inch simple-swap/hot-swap hard disk drive backplate assembly/backplane
Use this information to replace the 3.5-inch simple-swap/hot-swap hard disk drive backplate assembly/backplane. - Removing a USB embedded hypervisor flash device
Use this information to remove a USB embedded hypervisor flash device. - Replacing a USB embedded hypervisor flash device
Use this information to replace a USB embedded hypervisor flash device. - Removing the system battery
The following notes describe information that you must consider when replacing the battery. - Replacing the system battery
The following notes describe information that you must consider when replacing the system battery in the server. - Removing the operator information panel assembly
Use this information to remove the operator information panel assembly. - Replacing the operator information panel assembly
Use this information to replace the operator information panel assembly.
Give documentation feedback