FQXSPOS4002I : Watchdog [arg1] Failed to Capture Screen.
Watchdog [arg1] Failed to Capture Screen.
This message is for the use case where an operating system error has occurred and the screen capture failed.
Severity
Error
Alert Category
System - other
Serviceable
No
SNMP Trap ID
22
Automatically Notify Support
No
User Action
Complete the following steps until the problem is solved:
Reconfigure the watchdog timer to a higher value.
Make sure that the BMC Ethernet over USB interface is enabled.
Reinstall the RNDIS or cdc_ether device driver for the operating system.
Disable the watchdog.
Check the integrity of the installed operating system.
If problem persists, collect Service Data log.
Contact Lenovo Support.
Give documentation feedback