Skip to main content

Parts list

Use the parts list to identify each of the components that are available for your server.

For more information about ordering the parts shown in Figure 1:

Parts list

It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner before purchasing any new parts.

Note
Depending on the model, your server might look slightly different from the illustration.
Figure 1. Server components
Graphic showing all parts associated with the server

The parts listed in the following table are identified as one of the following:
  • Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request with no service agreement, you will be charged for the installation.

  • Tier 2 customer replaceable unit (CRU): You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.

  • Field replaceable unit (FRU): FRUs must be installed only by trained service technicians.

  • Consumable and Structural parts: Purchase and replacement of consumable and structural parts is your responsibility. If Lenovo acquires or installs a structural component at your request, you will be charged for the service.

Note
Unless otherwise specified in other agreements or contract terms, parts beyond their warranty terms and/or parts that have reached their maximum usage limitations do not qualify for warranty service.
Table 1. Parts list
IndexDescriptionTier 1 CRUTier 2 CRUFRUConsumable and Structural parts

For more information about ordering the parts shown in Figure 1:

Parts list

1Top cover   
2Standard air baffle   
3Riser assembly (LP)   
4Riser assembly (LP+LP)   
5Riser assembly (LP+FH)   
6Rear wall bracket   
7PCIe adapter   
8System board   
9RAID flash power module holder (on chassis)   
10RAID flash power module holder (in riser cage)   
11RAID flash power module   
12OCP 3.0 Ethernet adapter   
13Power supply unit   
14Power supply unit filler   
15Front I/O assembly with diagnostics panel (right)   
16Front I/O assembly   
17External LCD diagnostics handset   
18LCD diagnostics panel assembly   
19EIA (right)   
20LCD diagnostics panel   
21Front I/O assembly with diagnostics panel (top)   
222.5-inch drive bay filler   
232.5-inch drive   
243.5-inch drive   
257mm drive cage   
267mm drive backplane (bottom)   
277mm drive backplane (top)   
284-EDSFF cage   
297mm drive   
307mm drive bay filler   
31EDSFF drive   
32Security bezel   
334 x 2.5-inch front drive backplane   
3416-EDSFF front drive backplane   
358 x 2.5-inch front drive backplane   
3610 x 2.5-inch front drive backplane   
374 x 3.5-inch front drive backplane   
382 x 2.5-inch rear drive cage   
392 x 2.5-inch rear drive backplane   
40Internal RAID module   
41Intrusion switch cable   
42Fan module   
43Memory module   
44Chassis   
45Heat sink PEEK nut   
46Standard heat sink   
47Performance heat sink (T-shape)   
48Processor   
49M.2 drive   
50M.2 backplane   
51TPM adapter (for Chinese Mainland only)   
52M.2 retainer clip   
53CMOS battery (CR2032)