Skip to main content

10 x 2.5'' AnyBay backplane (two processors and liquid cooling)

Use this section to understand the AnyBay backplane cable routing for server model with ten 2.5-inch front drives for two processors and liquid cooling configuration.

Figure 1. Cable routing for 10 x 2.5'' AnyBay drives and 1 x 16i SFF RAID adapter (Gen 3/Gen 4)
Cable routing for 10 x 2.5'' AnyBay drives and 1 x 16i SFF RAID adapter (Gen 3/Gen 4)

FromToCable length
1 SAS 0 and SAS 1 connector on backplane1

  • C0 and C1 connectors on Gen 3 RAID adapter

  • C0 connector on Gen 4 RAID adapter

  • Gen 3:

    820/1020 mm

  • Gen 4:

    900/1020 mm
2 NVMe 0-1 connector on backplane2 PCIe connector 6 on processor board450 mm
3 NVME 2-3 connector on backplane3 PCIe connector 5 on processor board550 mm
4 NVME 4-5 connector on backplane4 PCIe connector 4 on processor board600 mm
5 Power connector on backplane5 Power connector 2A connector on processor board480 mm
6 NVMe 6-7 connector on backplane6 PCIe connector 3 on processor board550 mm
7 SAS 2 connector on backplane7

  • C2 connector on Gen 3 RAID adapter

  • C1 connector on Gen 4 RAID adapter

900 mm
8 NVME 8-9 connector on backplane8 PCIe connector 2 on processor board350 mm