Remove the rear OCP module
Use this information to remove the rear OCP module.
About this task
Attention
Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
Power off the server and disconnect all power cords for this task.
Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.
Procedure
Figure 1. OCP module removal
Loosen the thumbscrew that secures the adapter.
Pull out the OCP module by its handle on the left as shown.
After you finish
Install a new OCP module or a card filler. See Install the rear OCP module.
Demo video
Give documentation feedback