Riser 5 + OCP interposer cards + 8i/16i RAID/HBA adapter
The following shows the cable connections for the 16 x 2.5-inch SAS/SATA configuration with riser 5, front and rear OCP interposer cards, and two 8i RAID/HBA adapters or one 16i RAID/HBA adapter.
To connect riser 3/4 cables, see Riser 3/4 cage.
To connect cables to the riser 5 card and OCP interposer cards, see Riser 5 card + OCP interposer cards.
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
Figure 1. Backplane cable routing
| From | To | |
|---|---|---|
| 1 Backplane 1: SAS | 8i adapter
| 16i adapter
|
| 2 Backplane 2: SAS | 8i adapter
|
|
Give documentation feedback