Skip to main content

Backplanes: server models with 2.5-inch front drive bays

This section provides backplane cable connection information for server models with 2.5-inch front drive bays.

Before you start​

Ensure below parts are removed before starting cable routing for front backplanes.

Power cable connections​

The server supports the following 2.5-inch drive backplanes:

  • 8 x 2.5-inch SAS/SATA backplane

  • 8 x 2.5-inch AnyBay backplane (also used as an 8 x 2.5-inch NVMe backplane when only NVMe connectors on the backplane are cabled)

  • 24 x 2.5-inch SAS/SATA expander backplane

For connectors on each drive backplane, see Drive backplane connectors.

Figure 1. Power cable connections for the 8 x 2.5-inch SAS/SATA/AnyBay/NVMe backplanes
Power cable connections for the 8 x 2.5-inch drive backplanes
Figure 2. Power cable connections for the 24 x 2.5-inch expander backplane
Power cable connections for the 24 x 2.5-inch expander backplanes
FromToFromTo
1 Power connector on backplane 1Backplane 1 power connector1 Power connector 1 on backplaneBackplane 1 power connector
2 Power connector on backplane 2Backplane 2 power connector2 Power connector 2 on backplaneBackplane 2 power connector
3 Power connector on backplane 3Backplane 3 power connector  

Signal cable connections​

Refer to the specific topic for signal cable connections depending on the backplanes you have installed.