CFF expander + 8i RAID/HBA adapter
The following shows the cable connections for the 16 x 2.5" SAS/SATA + 8 x 2.5" AnyBay (Gen 5) + 4 x 2.5" SAS/SATA configuration with one CFF expander and one 8i RAID/HBA adapter.
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
Front backplane cable routing
SAS/SATA cable routing
Figure 1. SAS/SATA cable routing
From | To |
---|---|
1 Backplane 1: SAS | CFF expander
|
2 Backplane 2: SAS |
|
3 Backplane 3: SAS |
|
4 CFF expander: RAID/HBA | 8i adapter
|
5 CFF expander: PWR | Onboard: CFF EXP PWR |
NVMe cable routing
Figure 2. Cable routing when two Platinum series processors installed with no riser 3 | Figure 3. Cable routing in other scenarios | ||
From | To | From | To |
1 Backplane 3: NVMe 0-1 | Onboard: PCIe 6 | 1 Backplane 3: NVMe 0-1, 2-3 | Onboard: PCIe 4, 3 |
1 Backplane 3: NVMe 2-3 | Onboard: PCIe 5 | 2 Backplane 3: NVMe 4-5 | Onboard: PCIe 2 |
2 Backplane 3: NVMe 4-5 | Onboard: PCIe 2 | 3 Backplane 3: NVMe 6-7 | Onboard: PCIe 1 |
3 Backplane 3: NVMe 6-7 | Onboard: PCIe 1 |
Rear backplane cable routing
Figure 4. Rear backplane cable routing
From | To |
---|---|
1 Backplane 4: SAS | CFF expander
|
2 Backplane 4: PWR | Onboard: 7mm backplane power connector |
Give documentation feedback