Skip to main content

Remove the OCP 3.0 Ethernet adapter

Use this information to remove the OCP 3.0 Ethernet adapter.

Read the installation GuidelinesPower off the server for this taskATTENTION: Static Sensitive Device Ground package before opening
CAUTION
Make sure that all server power cords are disconnected from their power sources before performing this procedure.

To remove the OCP 3.0 Ethernet adapter, complete the following steps:

Figure 1. OCP 3.0 Ethernet adapter removal
OCP 3.0 Ethernet adapter removal

  1. Loosen the thumbscrew that secures the card.
  2. Pull out the OCP 3.0 Ethernet adapter.
After you finish

If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Demo video

Watch the procedure on YouTube