Complete the parts replacement
Follow the instructions in this section to complete the parts replacement.
Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your server.
Properly route and secure the cables in the server. Refer to the cable connecting and routing information for each component.
If the air baffle has been removed, reinstall it. See Install an air baffle.
If the server cover has been removed, reinstall it. See Install a server cover.
AttentionFor proper cooling and airflow, reinstall the air baffle before you turn on the server. Operating the server with the air baffle removed might damage server components.If necessary, install the server to the rack. See Install the server to the rack.
Reconnect the power cords and any cables that were removed.
Power on the server and any peripheral devices. See Power on the server.
Update the server configuration.
Download and install the latest device drivers: Lenovo Data Center Support.
Update the system firmware. See Update the firmware.
Update the UEFI configuration. See UEFI manual for ThinkSystem server.
Reconfigure the disk arrays if you have installed or removed a hot-swap drive or a RAID adapter. See Lenovo XClarity Provisioning Manager portal page for the LXPM documentation compatible with your server.