FQXSPMA0002N : Configuration Error for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
Configuration Error for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
This message is for the use case when an implementation has detected a Memory DIMM configuration error has been corrected.
Severity
Error
Alert Category
Critical - Memory
Serviceable
Yes
SNMP Trap ID
41
Automatically Notify Support
No
User Action
Complete the following steps:
- This error could be caused by an uncorrectable memory error or failed memory test. Check the log and service the event first. DIMMs disabled by other errors or actions could also lead to this event.
- Verify that the DIMMs are installed in the correct population sequence.
- Update UEFI firmware.
- Replace the DIMM.
- If the problem persists, collect the Service Data log.
- Contact Lenovo Support.
Give documentation feedback