Skip to main content

FQXSPMA0010J : [PhysicalMemoryElementName] on Subsystem [MemoryElementName] Throttled.

[PhysicalMemoryElementName] on Subsystem [MemoryElementName] Throttled.

This message is for the use case when an implementation has detected Memory has been Throttled.

Severity​

Warning

Alert Category​

System - Other

Serviceable​

Yes

CIM Information​

Prefix:PLAT

and ID:0142

SNMP Trap ID​

22

Automatically Notify Support​

No

User Action​

Complete the following steps:

  1. Check the event log of XClarity Controller for any fan- or cooling-related issues.
  2. Make sure that the airflow at the front and rear of the enclosure is not obstructed and that fillers are in place, clean and correctly installed.
  3. Make sure that the room temperature is within operating specifications.
  4. If the problem persists and there are no other DIMMs with the same indication, replace the DIMM.