Skip to main content

Install the front I/O module

Use this information to install the front I/O module.

About this task

Attention

  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

  • Power off the server and peripheral devices and disconnect the power cords and all external cables. See Power off the server.

  • Keep static-sensitive parts in their static-protective packages until installation to prevent exposure to static electricity. Handle the parts with an electrostatic-discharge wrist strap or other grounding systems. Place the parts on a static-protective surface.

Procedure

Install the front I/O module.
Figure 1. Install a front I/O module on 2.5'' chassis

  1. Insert the front I/O module into the front chassis.
  2. Install the screws to secure the front I/O module in place.

After you finish

  1. Connect the front I/O cables to the processor board. See Internal cable routing.

  2. Complete the parts replacement. See Complete the parts replacement.