Skip to main content

Install the security bezel

Use this information to install the security bezel.

About this task

Attention

  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

  • Keep static-sensitive parts in their static-protective packages until installation to prevent exposure to static electricity. Handle the parts with an electrostatic-discharge wrist strap or other grounding systems. Place the parts on a static-protective surface.

Procedure

  1. If you have removed the rack latches, reinstall them. See Install the rack latches.
  2. If the key is held inside the security bezel, remove it out of the security bezel.
    Figure 1. Key removal
    Removing the key from inside of the security bezel
    1. Press the latch to release the key.
    2. Remove the key from the retaining clip in the shown direction.
  3. Install the security bezel to the chassis.
    Figure 2. Security bezel installation
    Security bezel installation
    1. Insert the tab on the security bezel into the slot on the right rack latch.
    2. Press and hold the blue release latch.
    3. Rotate the security bezel inward until the left side clicks into place.
  4. Use the key to lock the security bezel to the closed position.
    Figure 3. Locking the security bezel
    Locking the security bezel

After you finish

Complete the parts replacement. See Complete the parts replacement.