Skip to main content

Remove the front OCP module

Follow the steps in this section to remove a front OCP module.

About this task

Attention

  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

  • Power off the server and peripheral devices and disconnect the power cords and all external cables. See Power off the server.

  • Keep static-sensitive parts in their static-protective packages until installation to prevent exposure to static electricity. Handle the parts with an electrostatic-discharge wrist strap or other grounding systems. Place the parts on a static-protective surface.

Procedure

Remove the front OCP module.
Figure 1. Removing the front OCP module

  1. Loosen the thumbscrew that secures the OCP module. Use a screwdriver if needed.
  2. Pull out the OCP module.

After you finish

  1. Install a new front OCP module or a module filler. See Install the front OCP module.

  2. If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.