Skip to main content

Remove the rear OCP module

Use this information to remove the rear OCP module.

About this task

Attention

  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

  • Power off the server and peripheral devices and disconnect the power cords and all external cables. See Power off the server.

  • Keep static-sensitive parts in their static-protective packages until installation to prevent exposure to static electricity. Handle the parts with an electrostatic-discharge wrist strap or other grounding systems. Place the parts on a static-protective surface.

Procedure

Remove the rear OCP module.
Figure 1. OCP module removal
OCP module removal

  1. Loosen the thumbscrew that secures the module. Use a screwdriver if necessary.
  2. Pull out the OCP module as shown.

After you finish

  1. Install a new OCP module or a card filler. See Install the rear OCP module.

  2. If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.