Front + middle + rear backplanes: 24 x NVMe + 8 x NVMe (two 4 x AnyBay) + 4 x NVMe

This section provides cable routing information for the 24 x 2.5" NVMe + 8 x 2.5" NVMe (using two 4 x 2.5" AnyBay backplanes) + 4 x 2.5" NVMe configuration with four retimer cards.

Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n

Front backplane cable routing​

Figure 1. NVMe cable routing to onboard connectors and one retimer card

From	To
1 Backplane 1: NVMe 0-1	Onboard: PCIe 10
2 Backplane 1: NVMe 2-3	Onboard: PCIe 9
3 Backplane 1: NVMe 4-5	Onboard: PCIe 8
4 Backplane 1: NVMe 6-7	Onboard: PCIe 7
5 Backplane 2: NVMe 0-1	Onboard: PCIe 6
6 Backplane 2: NVMe 2-3	Onboard: PCIe 5
7 Backplane 2: NVMe 4-5, 6-7	Onboard: PCIe 3, 4
8 Backplane 3: NVMe 0-1	Onboard: PCIe 2
9 Backplane 3: NVMe 2-3	Onboard: PCIe 1
10 Backplane 3: NVMe 4-5	Retimer: C0
11 Backplane 3: NVMe 6-7	Retimer: C1

Middle backplane cable routing​

Figure 2. Middle backplane cable routing

From	To
1 Backplane 5: NVMe 0-1	Retimer: C1
2 Backplane 5: NVMe 2-3	Retimer: C0
3 Backplane 6: NVMe 0-1	Retimer: C1
4 Backplane 6: NVMe 2-3	Retimer: C0
5 Backplane 5: PWR Backplane 6: PWR	Onboard: backplane power Onboard: backplane sideband Riser 1: PWR

Rear backplane cable routing​

Figure 3. Rear backplane cable routing

From	To
1 Backplane 4: NVMe 0-1	Retimer: C0
2 Backplane 4: NVMe 2-3	Retimer: C1
3 Backplane 4: PWR	Onboard: 7mm power connector