CFF 16i RAID/HBA adapter + CFF expander
This topic provides cable routing information for the 24 x 2.5-inch SAS/SATA + 8 x 2.5-inch SAS/SATA configuration with one CFF expander and one CFF 16i RAID/HBA adapter.
Front backplane cable routing
Cable routing when two processors installed
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
Figure 1. SAS/SATA cable routing to CFF expander and CFF 16i adapter
From | To |
---|---|
1 Backplane 1: SAS | CFF expander
|
2 Backplane 2: SAS |
|
3 Backplane 3: SAS |
|
4 CFF adapter: MB (CFF input) | Onboard: PCIe 7 |
5 CFF expander: RAID/HBA | CFF adapter
|
6 CFF adapter: PWR | Onboard: CFF RAID/HBA PWR |
7 CFF expander: PWR | Onboard: CFF EXP PWR |
Cable routing when one processor installed
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
Figure 2. SAS/SATA cable routing to CFF expander and CFF 16i adapter
From | To |
---|---|
1 Backplane 1: SAS | CFF expander
|
2 Backplane 2: SAS |
|
3 Backplane 3: SAS |
|
4 CFF adapter: MB (CFF input) | Onboard: PCIe 4 |
5 CFF expander: RAID/HBA | CFF adapter
|
6 CFF adapter: PWR | Onboard: CFF RAID/HBA PWR |
7 CFF expander: PWR | Onboard: CFF EXP PWR |
Rear backplane cable routing
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
Figure 3. Signal cable routing | Figure 4. Power cable routing | ||
From | To | From | To |
1 Backplane 4: SAS 0 | CFF expander
| 1 Backplane 4: PWR |
|
2 Backplane 4: SAS 1 |
|
Give documentation feedback