Front 12 x 3.5" SAS/SATA + Rear 4 x 2.5" AnyBay

This topic provides cable routing information for the front 12 x 3.5" SAS/SATA + rear 4 x 2.5" AnyBay configuration.

• SAS/SATA cable routing

• NVMe cable routing

SAS/SATA cable routing​

Note

The location of the adapter and cable connectors on the adapter may differ from those shown in the illustration. For details, see the table below.

Figure 1. SAS/SATA cable routing to SFF 16i adapter (Gen 3 )

From	To (16i adapter)	Cable length
1a BP1: SAS 0	1 C0C1	820/1020 mm
1b BP1: SAS 1
2 BP1: SAS 2	2 C2	900 mm
3 BP9: SAS	3 C3	450 mm

Figure 2. SAS/SATA cable routing to SFF 16i adapter (Gen 4)

From	To (16i adapter)	Cable length
1a BP1: SAS 0	1 C0	900/1020 mm
1b BP1: SAS 1
2a BP1: SAS 2	2 C1	760/450 mm
2b BP9: SAS

Figure 3. NVMe cable routing

From (BP9)	To (processor board)	Cable length
1 NVMe 2-3	1 PCIe 13B	280 mm
2 NVMe 0-1	2 PCIe 13A	280 mm