Front 12 x 3.5" SAS/SATA + Rear 4 x 3.5" SAS/SATA
This topic provides cable routing information for the front 12 x 3.5" SAS/SATA + rear 4 x 3.5" SAS/SATA configuration.
Note
The location of the adapter and cable connectors on the adapter may differ from those shown in the illustration. For details, see the table below.
Figure 1. SAS/SATA cable routing to SFF 16i adapter (Gen 3)
| From | To (16i adapter) | Cable length |
|---|---|---|
| 1a BP1: SAS 0 | 1 C0C1 | 820/1020 mm |
| 1b BP1: SAS 1 | ||
| 2 BP1: SAS 2 | 2 C2 | 900 mm |
| 3 BP9: SAS | 3 C3 | 300 mm |
Figure 2. SAS/SATA cable routing to SFF 16i adapter (Gen 4)
| From | To (16i adapter) | Cable length |
|---|---|---|
| 1a BP1: SAS 0 | 1 C0 | 900/1020 mm |
| 1b BP1: SAS 1 | ||
| 2a BP1: SAS 2 | 2 C1 | 760/450 mm |
| 2b BP9: SAS |
Give documentation feedback