Remove a super capacitor module from the middle 2.5-inch drive cage

Use this information to remove a super capacitor module from the middle 2.5-inch drive cage.

Read the installation Guidelines

Power off the server for this task

ATTENTION: Static Sensitive Device Ground package before opening

Before removing the RAID super capacitor module:

1. Remove the top cover. See Remove the top cover.

2. Disconnect the cable of the RAID super capacitor module.

To remove a super capacitor module from the middle 2.5-inch drive cage, complete the following steps:

1. Open the drive cage handle.
   Figure 1. Opening the handle of the middle drive cage
   

   

   
   
2. Remove the super capacitor module.
   1. Pull out the blue latch on the super capacitor cover.
   2. Slide the cover out of the holder.
   3. Take the super capacitor module out of the holder.
   Figure 2. Removing the super capacitor module