Install the front bezel
Use this information to install the front bezel.
About this task
S033
CAUTION
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.
Attention
Read Installation guidelines to ensure that you work safely.
Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.
Procedure
Install the front bezel.
Figure 1. Front bezel installation
Align the three plastic tabs on the right side of the front bezel with the corresponding holes in the chassis.
Pivot the front bezel inward until it snaps into position on the left side.
Demo video
Give documentation feedback