Skip to main content

Remove the air baffle

Follow this procedure to remove the air baffle.

About this task

S033
240VA shock hazard
CAUTION

Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.

S017
moving parts
CAUTION
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
Attention
  • Read Installation guidelines to ensure that you work safely.

  • Power off the server and disconnect all power cords for this task.

  • Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.

  • If the server is in a rack, remove it from the rack.

  • If foot stands are installed on the server, rotate them inwards and lay the server on its side for easier operation.

Procedure

Lift the air baffle from the server, and set it aside.
Figure 1. Air baffle removal
Air baffle removal
Attention
For proper cooling and airflow, install the air baffle before you turn on the server. Operating the server with the air baffle removed might damage server components.