Remove the fan cage assembly
Use this procedure to remove the fan cage assembly.
About this task
S002
CAUTION
The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
Attention
Read Installation guidelines to ensure that you work safely.
Power off the server and disconnect all power cords for this task.
Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.
If the server is in a rack, remove it from the rack.
If foot stands are installed on the server, rotate them inwards and lay the server on its side for easier operation.
Procedure
Remove the fan cage assembly.
Figure 1. Fan cage assembly removal
Lift and rotate the fan cage release latches to disengage the fan cage assembly from the server.
Lift the fan cage assembly from the server.
Demo video
Give documentation feedback