Skip to main content

Remove the front bezel

Use this information to remove the front bezel.

About this task

240VA shock hazard

Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.

  • Read Installation guidelines to ensure that you work safely.

  • Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.

  • If the server is in a rack, remove it from the rack.

  • If foot stands are installed on the server, rotate them inwards and lay the server on its side for easier operation.


Remove the front bezel.
Figure 1. Front bezel removal
Front bezel removal
  1. Lift the three plastic tabs to release the left side of the bezel from the chassis.
  2. Pivot the bezel as shown to remove it from the chassis.