Skip to main content

Install a front bezel

Follow the instructions in this section to install a front bezel.

About this task

240VA shock hazard

Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.

  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

  • Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.


  1. Align the three plastic tabs on the right side of the front bezel with the corresponding holes in the chassis; then, install the right side of the bezel into place.
  2. Pivot the front bezel inward until the left side snaps into position.
    Figure 1. Installation of a front bezel
    Front bezel installation

After this task is completed

  1. Reinstall the server cover. See Install a server cover.

  2. Reinstall the security door. See Install the security door.

  3. Complete the parts replacement. See Complete the parts replacement.