Skip to main content

Removing a thermal kit (hot-swap fan)

Use this information to remove a thermal kit (hot-swap fan).

Attention
It is not necessary to disconnect the power when removing the hot-swap fan. To ensure proper server operation, replace a failed hot-swap fan within 30 seconds.

To remove a hot-swap-fan, complete the following steps:

  1. Read the safety information that begins on Safety and Installation guidelines.
  2. Remove the cover (see Removing the cover).
  3. Grasp the orange fan tabs on both ends of the fan and slowly lift it out of the chassis.
    Figure 1. Fan removal
    Fan removal

If you are instructed to return the fan, follow all of the packaging instructions, and use any packaging materials for shipping that are supplied to you.