Removing and replacing Tier 1 CRUs
Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request, you will be charged for the installation.
The illustrations in this document might differ slightly from your hardware.
- Removing hot-swap hard disk drives
Use this information to remove hot-swap hard disk drives. - Replacing hot-swap hard disk drives
Use this information to replace hot-swap hard disk drives. - Removing simple-swap hard disk drives
Use this information to remove simple-swap hard disk drives. - Replacing simple-swap hard disk drives
Use this information to replace simple-swap hard disk drives. - Removing the 2.5-inch hot-swap rear hard disk drive kit
Use this information to remove the 2.5-inch hot-swap rear hard disk drive kit. - Replacing the 2.5-inch hot-swap rear hard disk drive kit
Use this information to replace the 2.5-inch hot-swap rear hard disk drive kit. - Removing the DVD drive
Use this information to remove the DVD drive. - Replacing the DVD drive
Use this information to replace the DVD drive. - Removing the DVD drive cable
Use this information to remove the DVD drive cable. - Replacing the DVD drive cable
Use this information to replace the DVD drive cable. - Removing a memory module
Use this information to remove a memory module. - Memory module installation
The following notes describe the types of DIMMs that the server supports and other information that you must consider when you install DIMMs. - Removing the SD adapter
Use this information to remove the SD adapter. The VMware ESXi embedded hypervisor software is available on the SD adapter. - Replacing the SD adapter
Use this information to replace an SD adapter. The VMware ESXi embedded hypervisor software is available on the SD adapter. - Removing a PCI riser-card assembly
Use this information to remove a PCI riser-card assembly. - Replacing a PCI riser-card assembly
Use this information to replace a PCI riser-card assembly. - Removing an adapter
Use this information to remove an adapter. - Replacing an adapter
The following notes describe the types of adapters that the server supports and other information that you must consider when you install an adapter. - Removing a ServeRAID SAS/SATA controller
Use this information to remove a ServeRAID SAS/SATA controller. - Replacing a ServeRAID SAS/SATA controller
Use this information to replace a ServeRAID SAS/SATA controller. - Removing the ServeRAID adapter memory module
Use this information to remove the ServeRAID adapter memory module. - Replacing the ServeRAID adapter memory module
Use this information to replace the ServeRAID adapter memory module. - Removing a thermal kit (hot-swap fan)
Use this information to remove a thermal kit (hot-swap fan). - Replacing a thermal kit (hot-swap fan)
Use this information to replace a thermal kit (hot-swap fan) - Removing a power supply
Use this information to remove a power supply. - Replacing a power supply
Use this information to replace a power supply. - Removing a hot-swap hard disk drive backplane
Use this information to remove a hot-swap hard disk drive backplane. - Replacing a hot-swap hard disk drive backplane
Use this information to replace a hot-swap hard disk drive backplane. - Removing a simple-swap hard disk drive backplate
Use this information to remove a simple-swap hard disk drive backplate. - Replacing a simple-swap hard disk drive backplate
Use this information to replace a simple-swap hard disk drive backplate. - Removing a USB embedded hypervisor flash device
Use this information to remove a USB embedded hypervisor flash device. - Replacing a USB embedded hypervisor flash device
Use this information to replace a USB embedded hypervisor flash device. - Removing the system battery
Use this information to remove the system battery. - Replacing the system battery
Use this information to replace the system battery. - Removing the media cage
Use this information to remove the media cage. - Replacing the media cage
Use this information to replace the media cage. - Removing the front USB connector assembly
Use this information to remove the front USB connector assembly. - Replacing the front USB connector assembly
Use this information to replace the front USB connector assembly. - Removing the front video connector assembly
Use this information to remove the front video connector assembly. - Replacing the front video connector assembly
Use this information to replace the front video connector assembly. - Removing the operator information panel assembly
Use this information to remove the operator information panel assembly. - Replacing the operator information panel assembly
Use this information to replace the operator information panel assembly. - Removing the LCD system information display panel
Use this information to remove the LCD system information display panel. - Replacing the LCD system information display panel
Use this information to replace the LCD system information display panel. - Removing the COM port bracket
Use this information to remove the COM port bracket. - Replacing the COM port bracket
Use this information to replace the COM port bracket. - Removing the security bezel
Use this information to remove the security bezel. - Replacing the security bezel
Use this information to replace the security bezel.
Give documentation feedback