7mm drive backplane
This section provides cable routing information for the 7mm drives.
For the locations of 7mm drive connectors on the processor board, see Processor-board connectors for cable routing for details.
|1 Power port on the 7mm solid-state drive
1 Left: rear hard drive power connector
1 Right: rear hard drive sideband connector
|2 Signal port on the 7mm solid-state drive
|2–1 PCIe 8 (for NVMe signal, connected when two processors are installed)
|2–2 7mm/M.2 signal port on the processor board (for SATA signal)
|2–3 PCIe 1 (for NVMe signal, connected when one processor is installed)