Direct water cooling module
Use this section to understand the cable routing of the Direct Water Cooling Module (DWCM).
For the locations of the leakage detection sensor module connector on the processor board, see Processor-board connectors for cable routing for details.
Note
For better cable arrangement, it is required to install the hoses and leakage detection sensor module to a designated holder, and make sure that the module is secured in holder clips. Use the illustration below or Install the Lenovo Neptune(TM) Processor Direct Water Cooling Module for details.
Figure 1. Direct water cooling module cable routing
| Cable | From | To |
|---|---|---|
| 1 Leak detection | Leak detection cable | Leak detection connector |
Give documentation feedback