6 x 2.5'' SAS/SATA + 2 x 2.5'' NVMe + 2 x 2.5'' AnyBay backplane (two processors)

Use this section to understand the AnyBay backplane cable routing for server model with ten 2.5-inch front drives and two processors.

Figure 1. Cable routing for 6 x 2.5'' SAS/SATA, 2 x 2.5'' NVMe, and 2 x 2.5'' AnyBay drives, and 1 x 16i/8i SFF RAID adapter (Gen 3/Gen 4)

Table 1. Mapping between RAID adapter, backplane, and processor board

From	To	Cable length
1 SAS 0 and SAS 1 connectors on backplane	1 C0 and C1 connectors on Gen 3 RAID adapter C0 connector on Gen 4 RAID adapter	Gen 3: 820/1020 mm Gen 4: 900/1020 mm
2 Power connector on backplane	2 Power connector 2A connector on processor board	480 mm
3 NVMe 6-7 connector on backplane	3 PCIe connector 4 on processor board	250 mm
4 NVMe 8-9 connector on backplane	4 PCIe connector 3 on processor board	350 mm

Figure 2. Cable routing for 6 x 2.5'' SAS/SATA, 2 x 2.5'' NVMe, and 2 x 2.5'' AnyBay drives, and 1 x 16i CFF RAID adapter (Gen 4)

From	To	Cable length
1 SAS 0 connector on backplane	1 C0 connector on RAID adapter	175 mm
2 Input connector on RAID adapter	2 PCIe connector 8 on processor board	450 mm
3 Power connector on backplane	3 Power connector 2A on processor board	480 mm
4 SAS 1 connector on backplane	4 C1 connector on RAID adapter	150 mm
5 NVME 6-7 connector on backplane	5 PCIe connector 4 on processor board	250 mm
6 NVME 8-9 connector on backplane	6 PCIe connector 3 on processor board	350 mm
7 Power connector on RAID adapter	7 Internal RAID power connector on processor board	210 mm