Skip to main content

Remove the USB I/O board

Follow the instructions in this section to remove the USB I/O board.

About this task

Attention

  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

  • Power off the server and peripheral devices and disconnect the power cords and all external cables. See Power off the server.

  • Keep static-sensitive parts in their static-protective packages until installation to prevent exposure to static electricity. Handle the parts with an electrostatic-discharge wrist strap or other grounding systems. Place the parts on a static-protective surface.

Procedure

  1. Remove the top cover. See Remove the top cover.
  2. Remove the cables connected to the USB I/O board.
  3. Remove the USB I/O board.
    Figure 1. Removing USB I/O board

    1. Loosen one screw that locks the USB I/O board to the system board assembly.
    2. Lift the board off the connector and take it out.

After you finish

If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.