Skip to main content

Install the USB I/O board

Follow the instructions in this section to install the USB I/O board.

About this task

Attention

  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

  • Power off the server and peripheral devices and disconnect the power cords and all external cables. See Power off the server.

  • Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.

Procedure

  1. Install the USB I/O board to the system board assembly.
    Figure 1. Installing USB I/O board

    1. Place the USB I/O board down as illustrated above to meet the connector on the system board assembly.
    2. Tighten one screw to secure the board.
  2. Connect the cable to the USB I/O board.
  3. Install the top cover. See Install the top cover.
  4. Refer to USB I/O board problems to troubleshoot USB problems.

After you finish

Complete the parts replacement. See Complete the parts replacement.

Demo video

Watch the procedure on YouTube