VGA/USB/Front panel connector
Use the section to understand the cable routing for the VGA/USB/Front panel connector on the left rack latch.
Note
The VGA connector is available on some models.
The following is the cable routing for server model with four 3.5-inch drive bays.
Figure 1. VGA/USB/Front panel connector cable routing for server model with four 3.5-inch drive bays
| Cable | To |
|---|---|
| 1 USB cable from the front of server | Front USB connector on the system board |
| 2 Front panel cable from the front of server | Front Panel connector on the system board |
| 3 VGA cable from the front of server | Front VGA connector on the system board |
The following is the cable routing for server model with eight/ten 2.5-inch drive bays.
Figure 2. VGA/USB/Front panel connector cable routing for server model with eight/ten 2.5-inch drive bays
| Cable | To |
|---|---|
| 1 USB cable from the front of server | Front USB connector on the system board |
| 2 Front panel cable from the front of server | Front Panel connector on the system board |
| 3 VGA cable from the front of server | Front VGA connector on the system board |
Give documentation feedback