FQXSPPU0001N : An Over-Temperature Condition has been detected on [ProcessorElementName].
An Over-Temperature Condition has been detected on [ProcessorElementName].
This message is for the use case when an implementation has detected an Over-Temperature Condition Detected for Processor.
Severity
Error
Alert Category
Critical - Temperature
Serviceable
Yes
SNMP Trap ID
0
Automatically Notify Support
No
User Action
Complete the following steps until the problem is solved:
Check the XCC event log for any fan or cooling related issues and address them first.
Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are correctly installed and are in place.
Make sure that the room temperature is within operating specifications.
Upgrade all system and chassis (if applicable) firmware to the latest level.
NoteIf the device is part of a cluster solution, verify that the latest level of code is supported for the cluster solution before the update.
If problem persists, collect Service Data log.
Contact Lenovo Support.