Skip to main content

Install the CPU complex

Follow instructions in this section to install the CPU complex. The procedure must be executed by a trained technician.

About this task

Attention
  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
  • Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.
  • Make sure that all cables, adapters, and other components are installed and seated correctly and that you have not left loose tools or parts inside the server.
  • Make sure that all internal cables are correctly routed. See Internal cable routing.

Procedure

  1. Align the guide pins with the guide slots; then, carefully lower the CPU complex into the chassis.
  2. Fasten the twelve M3 screws (C1-C6) (PH2, 12 x M3, 0.5 newton-meters, 4.3 inch-pounds) to secure the CPU complex to the chassis.
    Figure 1. CPU complex installation
    CPU complex installation

After you finish

  1. Reconnect all the cables that were disconnected. See Internal cable routing.
  2. Reinstall the rear top cover. See Install the rear top cover.
  3. Reinstall the front top cover. See Install the front top cover.
  4. Complete the parts replacement. See Complete the parts replacement.