Skip to main content

Install the I/O cover

Follow instructions in this section to install the I/O cover. The procedure must be executed by a trained technician.

About this task

Attention
  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
  • Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.

Procedure

Install the I/O cover.
  1. Align the I/O cover guide pins with the guide holes on the chassis; then, lower the I/O cover onto the chassis and slide it towards the front of the server until it engages with the chassis.
  2. Fasten the four M3 screws (PH1, 4 x M3, 0.5 newton-meters, 4.3 inch-pounds) to install the I/O cover.
    Figure 1. Installing the I/O cover
    Installing the I/O cover

After you finish

  1. Reinstall the front top cover. See Install the front top cover.
  2. Complete the parts replacement. See Complete the parts replacement.