Skip to main content

Install the PCIe switch board

Follow instructions in this section to install the PCIe switch board. The procedure must be executed by a trained technician.

About this task

Attention
  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
  • Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.

Procedure

  1. Hold the PCIe switch board in the correct orientation as illustrated; then, align the PCIe switch board with the six standoffs on the PCIe switch shuttle, and gently place it onto the PCIe switch shuttle.
  2. Fasten the six M3 screws (PH1, 6 x M3, 0.9 newton-meters, 8 inch-pounds) to secure the PCIe switch board.
    Figure 1. PCIe switch board installation
    PCIe switch board installation

After you finish

  1. Reinstall all the PCIe switch board heat sinks. See Install a PCIe switch board heat sink.
  2. Reinstall all the front PCIe adapters. See Install a front PCIe adapter.
  3. Reinstall the PCIe switch shuttle. See Install the PCIe switch shuttle.
  4. Complete the parts replacement. See Complete the parts replacement.