Accessing the Lenovo SDI Management Platform web interface
You can launch the Lenovo SDI Management Platform web interface from any system that has network connectivity to the Lenovo SDI Management Platform virtual machine.
Before you begin
Ensure that you are using one of the following supported web browsers. For more information, see Supported hardware and software.
- Chrome 83.0 or later
- Firefox 77.0 or later
- Microsoft Edge 83.0 or later
Access to the web interface is through a secure connection. Ensure that you use https.
Procedure
To access the Lenovo SDI Management Platform web interface for the first time, complete the following steps:
- Point your browser to the IP address of the Lenovo SDI Management Platform virtual appliance.
Using a static IPv4 address If you specified an IPv4 address during installation, use that IPv4 address to access the web interface using the following URL.
https://<IPv4_address>/#/login.html
For example:https://192.0.2.10/#/login.html
Using a DHCP server in the same broadcast domain as Lenovo SDI Management Platform
If a DHCP server is set up in the same broadcast domain as Lenovo SDI Management Platform, use the IPv4 address that is displayed in the Lenovo SDI Management Platform virtual-appliance console to access the web interface using the following URL.
https://<IPv4_address>/#/login.html
For example:https://192.0.2.10/#/login.html
The initial login page is displayed.
Select the desired language from the language drop-down list
Enter the default account USERID and PASSW0RD (where 0 is zero), and click Log In
The first time that a specific user account is used to log in to Lenovo SDI Management Platform, you are required to change the password. By default, passwords must contain 8–128 characters and must meet the following criteria.
a. Must contain at least one alphabetic character, and must not have more than two sequential characters, including sequences of alphabetic characters and digits, and QWERTY keyboard keys (for example, “abc”, “123”, and “asd” are not allowed)
b. Must contain at least one number
c. Must contain at least two of the following characters.
- Uppercase alphabetic characters (A – Z)
- Lowercase alphabetic characters (a – z)
- Special characters ; @ _ !' $ \& +
d. Must not repeat or reverse the user name
f. Must not contain more than two of the same characters consecutively (for example, “aaa”, “111”, and “...” are not allowed)
After you finish
Continue initial setup by going to Creating a local user.