10 x 2.5'' AnyBay
See this section to understand the cable routing of 10 front AnyBay drives with the 10 x 2.5'' AnyBay backplane (Gen 4) installed.
To connect cables for a 7mm drive backplane, refer to 7mm drive backplane.
To connect power cables for a backplane for standard 2.5-inch or 3.5-inch drives, refer to Cable routing for backplane power.
To connect cables for M.2 drives, refer to M.2 drive backplane.
Cable routing with an SFF HBA/RAID adapter
The following tables show the mapping relationship between backplane connectors and an SFF HBA/RAID adapter (Gen 3 or Gen 4).
Figure 1. Cable routing for 10 AnyBay drives with a 16i SFF RAID adapter (Gen 4)
Backplane | From | To |
---|---|---|
Front BP (SAS) | 1 SAS 0, SAS 1 | 1 C0 |
Front BP (NVMe) | 2 NVMe 2–3, 0–1, 4–5 | 2 PCIe 3, 4, 5 |
3 NVMe 8–9, 6–7 | 3 PCIe 1, 2 | |
Front BP (SAS) | 4 SAS 2 | 4 C1 |
Figure 2. Cable routing for 10 front AnyBay drives and 2 rear SAS/SATA drives with a 16i SFF RAID adapter (Gen 4)
Backplane | From | To |
---|---|---|
Front BP (SAS) | 1 SAS 0, SAS 1 | 1 C0 |
Front BP (NVMe) | 2 NVMe 2–3, 0–1, 4–5 | 2 PCIe 3, 4, 5 |
3 NVMe 8–9, 6–7 | 3 PCIe 1, 2 | |
Front and rear BP (SAS) | 4 SAS 2 (front), SAS (rear) | 4 C1 |
Figure 3. Cable routing for 10 AnyBay drives with a 16i SFF RAID adapter (Gen 3)
Backplane | From | To |
---|---|---|
Front BP (SAS) | 1 SAS 0, SAS 1 | 1 C0, C1 |
Front BP (NVMe) | 2 NVMe 2–3, 0–1, 4–5 | 2 PCIe 3, 4, 5 |
3 NVMe 8–9, 6–7 | 3 PCIe 1, 2 | |
Front BP (SAS) | 4 SAS 2 | 4 C2 |
Figure 4. Cable routing for 10 front AnyBay drives and 2 rear SAS/SATA drives with a 16i SFF RAID adapter (Gen 3)
Backplane | From | To |
---|---|---|
Front BP (SAS) | 1 SAS 0, SAS 1 | 1 C0, C1 |
Front BP (NVMe) | 2 NVMe 2–3, 0–1, 4–5 | 2 PCIe 3, 4, 5 |
3 NVMe 8–9, 6–7 | 3 PCIe 1, 2 | |
Front and rear BP (SAS) | 4 SAS 2 (front) | 4 C2 |
Rear BP (SAS) | 5 SAS (rear) | 5 C3 |
Give documentation feedback